So how did my foray with the Polaroid I2 go.

It went better than my first effort with the SX-70. The camera is clearly working as intended. The picture above, and the three below are pretty much straight out of the camera and onto the scanner.

I was a bit disappointed, but on further consideration I decided that the poor quality of the photographs is most likely the fault of the photographer (i.e. me). One of the main reasons for this is that I’m stubborn. I’d read on a number of websites that the camera didn’t work well in auto mode: i.e. it tended to overexpose and select a slow shutter speed, which introduces blur. I’d been told, but I decided to find out for myself. I can confirm that what the other sites had said was true.

Of course, after I’d scanned them, I had to fiddle around with them in Lightroom. I didn’t want to spend a lot of time on them, so they’re over sharpened in many cases. See the pictures below for how they looked after I’d “processed” them.

There were numerous constraints: Apart from the SX-70 mentioned above I’d only ever used a polaroid camera once, and that was about 50 years ago, and it was one of the “cheap and cheerful” models; This was the very first time that I was using this particular camera; I don’t know much about scanning polaroids and I’m not much good at scanning at the best of times; and I’d chosen to use a mode that everything I had read told me not to use.

So, bearing mind the constraints I was satisfied with the results. I’ll certainly use the camera again (I a paid a lot for it), but next time I won’t use the auto mode. Instead, I’ll probably use either Aperture priority (usually my preferred mode) or maybe even full manual.